【Technical parameters of the whole vehicle】 | |||||
product name | KFT5043XLC62 Isuzu elf freezer truck | ||||
Total mass (kg) | 4000 | Tank volume (m3) | |||
Rated mass (kg) | 1170,1320 | Dimensions (mm) | 4920X1880X2750 | ||
Curb weight (kg) | 2700,2550 | Cargo compartment size (mm) | 3050X1700X1700 | ||
The number of passengers in the cab (person) | 2 | Maximum load of saddle (kg) | |||
Approach angle/departure angle (°) | 24/19 | Front suspension/rear suspension (mm) | 1015/1415 | ||
Axle load (kg) | 1940/2060 | Maximum speed (km/h) | 90 | ||
Remark: | Remarks: The top of the carriage is closed and cannot be opened. Other refrigeration units with the same power can be installed, and bottom refrigeration units can be installed; single-side door or no side can be installed Doors, side doors can be installed on the right and left sides of the carriage; side doors and rear doors can be equipped with door locks with exposed door bars or concealed door bars; quality parameters caused by all options The change is within 3%. Side protection material aluminum alloy or Q235, rear lower protection material Q235, both side protection and rear protection are used with the vehicle Connect with bolts; the height of the lower edge of the rear lower protection is 435mm from the ground, and the section (height 120mm×width 75mm). The engine of this car is 4 The net power of KH1CN6LB is 87kW, and the declared fuel consumption value is 11.4L/100km; the car is equipped with ABS, ABS and The corresponding relationship between the controller model and the manufacturer is: APG3550500A/Zhejiang Asia-Pacific Mechanical and Electrical Co., Ltd., CM4YL/ Guangzhou Ruili Komi Automotive Electronics Co., Ltd.; optional widened rear-view mirrors and ordinary rear-view mirrors with the chassis; optional one that only changes the front panel and the front panel The cab with grille and front combination lamps, at the same time optional front “4K ENGING” or “NJR” or “NHR” or “NKR” Or “100P” sign; optional front “4K ENGING” or “NJR” or “NHR” or “NKR” sign; optional Install the deflector. When the hydraulic tail plate is selected, the horizontal length of the hydraulic tail plate in the retracted state is 280mm, the weight of the tail plate is 350kg, and the rear lower part is protected. The guard is connected with the tail plate cantilever bolts, the lower edge of the rear lower guard is 450mm from the ground, the rear guard section is circular, and the cross-sectional diameter is 120m m. Optional ETC. | ||||
【Chassis technical parameters】 | |||||
Chassis model | QL1040BUEAY | Chassis name | Truck chassis | ||
Brand name | Isuzu | manufacturer | Qingling Motors Co., Ltd. | ||
Number of axes | 2 | Number of tires | 4 | ||
Wheelbase (mm) | 2490 | ||||
Tire specifications | 7.00R15 10PR,7.00R15LT 10PR | ||||
Number of leaf spring | 6/5 | Front track (mm) | 1401 | ||
Fuel type | diesel fuel | Rear track (mm) | 1395 | ||
Emission standard | GB17691-2018 National Ⅵ | ||||
engine model | Engine manufacturer | engine capacity | Engine power | ||
4KH1CN6LB | Isuzu (China) Engine Co., Ltd. | 2999 | 88 | ||
